Tel: +65 6303 2425
Fax: +65 6826 4391
E-mail: info@aseptec-sg.com
  Top » Product » Flow Products » Africa Flow Chemistry »
Synthesis and Analysis

The Synthesis and Analysis (SA) System has all the functionality of the 4 Channel Synthesis System but also enables each reaction to be automatically analysed by HPLC.
The Synthesis and Analysis (SA) System is ideal for use in the following applications:

* Medicinal chemistry

- Method development (semi automated)
* Process chemistry

- Reaction optimisation (semi automated)
Specification

4 Syringe Pumps:


Flow rate 2.5µl to 2.5ml/min with pressure sensors and automatic over-pressure shutdown

4 Pressurized Input Bottles:


Regulated 1 bar Nitrogen or Argon is supplied to up to 4 bottles, eliminating cavitation and bubble formation and allowing the use of air sensitive reagents (requires laboratory gas supply).

4 Manual Injection Loops and Valves:


1ml, 5ml or 10ml loops

Automatic Reagent Injection:


The RIM allows reagents stored on the robot deck to be automatically aspirated and loaded into one of 4 injection loops. The robot has a coaxial needle allowing the use of air sensitive reagents in vials. All timings are automatically managed, even for complex, multi-reactor systems. Samples are pre-pressurized before injection into the flowing stream.

Chemical Resistance:


All wetted parts are glass, PTFE or other similar fluoropolymer.

2 Temperature Controlled Microreactor Positions:


The Africa Heater/Cooler has two reaction positions, each of which can be factory set to either:

* 0°C – 150°C
* 40°C – 250°C



Reaction Sampling:


The Sampler and dilutor takes a 5µl sample from the flowing stream, dilutes it by up to 250 fold and injects it onto an analytical system e.g. HPLC, LCMS, UPLC etc.

HPLC Analysis:


The Africa HPLC allows integrated synthesis conditions an HPLC traces.

Automation:


The Africa software allows an almost unlimited number of reactor configurations and automates the entire process. Only “chemist friendly” data such as volumes, times and temperatures need to be added – no need to deal with flow rates if you don’t want to. The timings of all events such as pumps starting, injections, collections etc. are all automatically calculated and performed automatically.

Parts

The Synthesis and Analysis (SA) System contains the following modules:
Description Part Number
Microreactors - Various
Tube Reactors - Various
2 Reagent Pumps - 2100140
Heater/Cooler - 2100090
Reagent Store - 2100150
Pressurisation Module - 2110701
Tube Reactor Heater (Optional) - 2100640
Laptop and Software - 2110724
Synthesis Pack - 2110714
Analysis Pack - na

Categories

Amplifier
Generator
Batch Products
Flow Products
  Africa Flow Chemistry
  Asia Flow Chemistry
  FRX Flow Chemistry
Applications
Electrochemistry
Impedance Analyzer
Lock-in Amplifier
Spellman High Voltage Supplies

Information

About Us
Contact Us
Privacy Notice