Tel: +65 6303 2425
Fax: +65 6826 4391
  Top » Product » Flow Products » Africa Flow Chemistry »
Synthesis and Automation

The Synthesis and Liquid Handling (SH) System enables entirely automated flow synthesis, reagent injection and product collection.
The Synthesis and Liquid Handling (SH) System is ideal for use in the following applications:

* Medicinal chemistry
o Flow chemistry investigations (fully automated)
o Intermediate production (fully automated)
o Synthetic conditions not possible in regular batch chemistry
o Library synthesis (fully automated)
* Process chemistry
o Reaction optimisation (vary reaction conditions such as reagent, reaction time, reaction temperature and ratio of reagents with automated collections)
o Early scale-up (fully automated)
* Degradation testing (fully automated)
* Stability studies (fully automated)


4 Syringe Pumps:

Flow rate 2.5µl to 2.5ml/min with pressure sensors and automatic over-pressure shutdown

4 Pressurized Input Bottles:

Regulated 1 bar Nitrogen or Argon is supplied to up to 4 bottles, eliminating cavitation and bubble formation and allowing the use of air sensitive reagents (requires laboratory gas supply).

Automatic Reagent Injection:

The RIM allows reagents stored on the robot deck to be automatically aspirated and loaded into one of 4 injection loops. The robot has a coaxial needle allowing the use of air sensitive reagents in vials. All timings are automatically managed, even for complex, multi-reactor systems. Samples are pre-pressurized before injection into the flowing stream.

Chemical Resistance:

All wetted parts are glass, PTFE or other similar fluoropolymer.

2 Temperature Controlled Microreactor Positions:

The Africa Heater/Cooler has two reaction positions, each of which can be factory set to either:

* 0°C – 150°C
* 40°C – 250°C

Automated Product Collection:

Each different reaction is automatically collected in a different vial. The vial (or vessel) size is set by the user. Reactions larger than the vial size are automatically collected across multiple vials or preparative quantities can be collected in large one vessel.


The Africa software allows an almost unlimited number of reactor configurations and automates the entire process. Only “chemist friendly” data such as volumes, times and temperatures need to be added – no need to deal with flow rates if you don’t want to. The timings of all events such as pumps starting, injections, collections etc. are all automatically calculated and performed automatically.


The Synthesis and Liquid Handling (SH) System contains the following modules:
Description Part Number
Microreactors - Various
Tube Reactors - Various
2 Reagent Pumps - 2100140
Heater/Cooler - 2100090
Pressurisation Module - 2110701
Reagent Injection Module - 2101431
Tube Reactor Heater (Optional) - 2100640
Laptop and Software - 2110724
Synthesis Pack - 2110714


Batch Products
Flow Products
  Africa Flow Chemistry
  Asia Flow Chemistry
  FRX Flow Chemistry
Impedance Analyzer
Lock-in Amplifier
Spellman High Voltage Supplies


About Us
Contact Us
Privacy Notice